38
Care and cleaning
●
To remove the drain
filter, turn the
filter anti-clockwise to release, then lift out.
●
Once the drain filter has been removed you can lift the filter plate out.
●
Rinse them thoroughly under running water and then replace.
Replace the filters correctly after cleaning, making sure the filter plate is flush with
the
dishwasher base.
IMPORTANT !
When cleaning the underside of the filter plate, take care handling its sharp outer
edge.
Cleaning the spray arms
Cleaning the upper spray arm/head
Limescale and food particles in the wash water can block the holes in the spray
arms and the arm mountings. Clean these parts about once a month, or more often
should the need arise.
Do not remove the upper spray arm for cleaning. Clean with a small plastic-bristled
brush, or if heavily soiled or blocked use a dishwasher cleaner/descaler following
the manufacturer’s instructions.
Drain filter
Filter plate
To Next Page
Loading...
