If the timer is set on more than one zone:
1. When you set the time for several cooking zones simultaneously, decimal
dots of the relevant cooking zones are on. The minute display shows the min.
timer. The dot of the corresponding zone flashes.
(set to 15 minutes)
(set to 30 minutes)
2. Once the countdown timer expires, the corresponding zone will switch off.
Then it will show the new min. timer and the dot of corresponding zone will flash.
• Touch the heating zone selection control, the corresponding timer will be
shown in the timer indicator.
Cancelled the timer
1. Touching the heating zone selection control
that you want to cancel the timer
2. Touch the and together to set the timer to ”00”, the timer is
cancelled,then the timer indicator shows “- - “ .
To Next Page
Loading...
