Cooking zones set for this feature will:
1. Touching the heating zone selection control
that you want to set the timer for. (e.g. zone 1#)
2. Touch timer control, The minder indicator
will start flashing and “30” will show in the
timer display.
3. Set the time by touching the “-” or “+” control.
Hint: Touch the “-” or “+” control once will decrease or increase by 1 minute.
Touch and hold the “-” or “+” control, the timer will decrease or increase
by 10 minutes.
If the setting time exceeds 99 minutes, the timer will automatically
return to 0 minute.
4. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
5.
To cancel the timer, touch the heating zone selection control, and then touch
the “-” of timer and scrolling down to “0”, the timer is cancelled, and the “00” will
show in the minute display, and then “--”.
6.
When cooking timer expires, the corresponding cooking zone will be
automatically switch off and show “H”.
Other cooking zone will keep operating if they are turned on previously.
To Next Page
Loading...
