5. If the ferromagnetic part covers only partially the base of the pan, only the
ferromagnetic area will heat up, the rest of the base may not heat up a sufficient
temperature for cooking.
6. If the ferromagnetic area is not homogeneous, but presents others material such as
aluminum this may affect the heating up and the pan detection.
If the base of the pan is similar to the pictures below the pan could be not detected.
The base diameter of induction cookware
Cooking zone
Minimum Maximum
7KHDERYHPD\YDU\DFFRUGLQJWRWKHVL]HRIWKHSDQDQGWKHPDWHULDOLWLVPDGHIURP
To Next Page
Loading...
