Using your Induction Hob
To start cooking
1.
Touch the ON/OFF control.
After power on, the buzzer beeps once, all
displays show “ – ” or “ – – ”, indicating that the
induction hob has entered the state of standby
mode.
2.
Place a suitable pan on the cooking zone
that you wish to use.
•
Make sure the bottom of the pan and the
surface of the cooking zone are clean and dry.
3.
Touching the heating zone selection control and
a indicator upon the key will flash.
4.
Select a heat setting by touching the “-” or
“+” control.
•
If you don’t choose a heat setting within 1
minute, the Induction hob will automatically
switch off. You will need to start again at step 1.
•
You can modify the heat setting at any time during cooking.
To Next Page
Loading...
