EasyManua.ls Logo

Candy CIKC30 - Operation of Product; Touch Controls; Technical Specification; Before Using Your New Induction Hob

Candy CIKC30
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
2.4 Before using your New Induction Hob
Read this guide, taking special note of the ‘Safety Warnings’ section.
Remove any protective film that may still be on your Induction hob.
2.5 Technical Specification
Cooking Hob
CI
KC30
Cooking Zones
2 Zones
Supply Voltage
220-240V~ 50Hz or 60Hz
Installed Electric Power
3500W
Product Size L×W×H(mm)
288X520X59.5
Building-in Dimensions A×B (mm)
268X500
3.
Operation of Product
3.1 Touch Controls
The controls respond to touch, so you don’t need to apply any pressure.
Use the ball of your finger, not its tip.
You will hear a beep each time a touch is registered.
Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a cloth) covering them.
Even a thin film of water may make the controls difficult to operate.
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents

Table of Contents

Related product manuals