12
Display
For the first power-on, the display screen (including the key light) will be displayed in full for 3s,
and then the gear in the middle displays the state of running.
Display of normal running
On the occurrence of a failure, the corresponding LED light will give a combined display of
failure code (loop display);
Where there is no failure, the LED light will display the current running gear of the refrigerator.
Gear setting
The gear will be changed once every time when you press the key SET. Then, the refrigerator
will run under the setting value after 15s.
Fast cool function
Enter: Circulating modulation rapid cooling mode.
Operate: Indicator of rapid cooling lights up, and the refrigerator operates at 2°C.
Exit: 1. Operate 150min under the rapid cooling mode.
2. Temperature adjustment can exit from the rapid cooling mode.
• Temperature control of freezing chamber
The freezing temperature is relatively low in “COLDER” position, while the freezing temperature
is relatively high in “COLD” position, thus, “NORMAL” position is generally used.
When ambient temperature is high in summer, the temperature shall be in the range from
“NORMAL" to “COLD”. If the ambient temperature is above 35°C, then “COLD” position shall
prevail.
When ambient temperature is low in winter, the temperature shall be in the range from “NORMAL"
to “COLDER”. If the ambient temperature is below 10°C, then “COLDER” position shall prevail.
To Next Page
Loading...
Need help?
General
