8
5) Take off the door of freezing chamber.
refrigerating.
6) Take off hinge assembly with a screw
driver, Assemble lower hinge assembly
to left side of the cabinet with a screw
driver.
10) Take on knuckle guard.
2.4 Door Space Requirements
The unit's door must be able to open fully as shown.
W×D≥990×1025mm
2.5
Levelling the Unit
To do this adjust the two levelling feet at the front of the unit.
If the unit is not level, the door and magnetic seal alignments
will not be covered properly.
Make sure that the foot touches the ground before use.
Look down from the top, clockwise and counterclockwise loosening, tightening.
To Next Page
Loading...
Need help?
General
