11
Changing over the freezer compartment door
Open the freezer compartment door a little way Using a small screwdriver, press the
spring in the opening of the lower door bearing slightly upwards and take the door bearing
out complete with the door.
Position the covering cap (M) on the opposite side Turn the freezer compartment door
through 180 and fit the lower door bearing into the lower bearing cavity of the freezer
compartment door.
Lift the freezer compartment door a little way upwards, fit it into the upper door bearing,
and at the same time insert the lower door bearing into the square hole.
Small upward and downward adjustments of the freezer compartment door will make
fitting easier.
OPERATION AND FUNCTIONS
Operation-temperature regulation
To switch on the appliance, turn the thermostat knob clockwise from “0”（stop）to the
required cooling temperature:
z Lower number=less cool
z Higher number=cooler
Freezers can be fitted with indicator light as follow: orange light for continuous functioning,
green light for normal functioning, red alarm light when the temperature is too high. The
internal appliance temperature is maintained constant automatically. An intermediate
thermostat setting is generally recommended.
z At higher thermostat settings with higher ambient temperature and a large amount
of stored food, operation may be continuous with the formation of frost or ice on the
cooler walls.
z In this cases, position the thermostat knob at a lower setting on some models
M
To Next Page
Loading...
