!
EN
75
!
When a programme is running, the
indicator lights will light in sequence to
indicate the current phase:
DRYING CYCLE
It lights up when the drying cycle is
running.
COOLING
It lights up when the cycle is in the
cooling phase.
END CYCLE
It lights up when the cycle is done.
It lights up when it’s necessary to empty the
condensate water tank.
The indicator light illuminates in fixed mode
to signal the need of cleaning the lint filters
and in blinking mode to signal the need of
cleaning the heat exchanger.
WATER CONTAINER
indicator
light
LINT FILTERS AND HEAT
EXCHANGER CLEANING
indicator light
To Next Page
Loading...
