Why my Candy CSTG 27TE/1-S does not work / start?
If your Candy Dishwasher isn't starting, ensure it's correctly plugged into a working socket and that the power is on. Test the wall socket with another appliance. The door must be properly closed. Also, verify that you've selected the correct program and pressed the start button, and that the machine isn't in pause or time delay mode.
What to do if I see water leaked on the floor near the Candy Dishwasher?
If you find water on the floor near your Candy Dishwasher, it could be leaking from the seal between the tap, supply hose, and fill valve. Replace the seal and tighten the hose connections correctly. Also, make sure the front filter is correctly closed.
How to fix E2 error on Candy Dishwasher?
If you see error code E2 or 2 flashes on your Candy Dishwasher, it means the machine isn't loading water. First, make sure the water supply tap is fully open. Check that the water supply hose isn’t bent, kinked, or trapped. Ensure the drain pipe is at the proper height. Close the water supply tap, unscrew the filler hose, and clean the anti-sand filter. Finally, inspect the filter for clogs or foreign objects.
What to do if my Candy CSTG 27TE/1-S shows E3 error?
If your Candy Dishwasher displays error E3 or flashes 3 times, it indicates a draining issue. Check the filter for clogs or foreign objects. Ensure the drain hose isn’t bent, kinked, or trapped. Verify your home drainage system isn't blocked by trying to drain water in the sink.
How to fix E7 error on Candy CSTG 27TE/1-S?
If your Candy Dishwasher displays error code E7 or flashes 7 times, it indicates a door problem. Make sure the door is correctly closed and that no clothes are preventing it from closing fully. If the door is locked, turn off and unplug the dishwasher, wait 2-3 minutes, and then try reopening the door.
General| Brand | Candy |
|---|---|
| Model | CSTG 27TE/1-S |
| Category | Dishwasher |
| Language | English |
To Next Page
