EN 28
The Hydro Easy Clean procedure uses steam to help remove remaining fat and food particles from the
oven.
1. Pour 300 ml of water into the Hydro Easy Clean container at the bottom of the oven.
4. Allow the program to operate.
5. After the cycle, allow the oven to cool down.
6. When the appliance is cool, clean the inner surfaces of the oven with a cloth.
Warning: Make sure that the appliance is cool before you touch it.
Care must be taken with all hot surfaces as there is a risk of burns. Use distilled or drinkable water.
Description
d1
d2
For perfect, regular cleaning of the oven cavity.
This function enables to lock the door during the process
d3
300 ml
For extremely thorough cleaning and removing large
amounts of dirt from the oven cavity.
This function enables to lock the door during the
To Next Page
Loading...
