EN 10
Display description
1. Timer/automatic mode
2. Fan function
3. Defrost mode
4. Temperature or clock display
5. LCD display adjustment controls
6. Function selector knob
7. Programme selector knob
WARNING!
The rst operation to carry out after installa-
tion, or after a power cut, is to set the time of
day (a power cut has occured if the display is
ashing 12:00).
200°-> The temperature LED “°” ashes until
the displayed temperature is reached.
HOT -> When a programme nishes, if the
oven is still hot, the display shows “HOT”, al-
ternating with the time, even if the knobs are
positioned to OFF.
67
1
4
5
2
3
To Next Page
Loading...
