18
10.1
10.3
10.2
Connection to the mains10
Safety warnings
To carry out the electrical connection of the device safely, observe the fol-
lowing warnings:
• Any improperly performed repair, installation and maintenance can seriou-
sly harm the user;
• The producer do not assume any liability for direct or indirect damage
caused by incorrect installation, maintenance or repair. It is also not liable
for damage caused by missing or interrupted grounding pipeline (electric
shock);
• Connect the product using only the power cord;
• The product must be connected to a properly made electrical system;
• In case of incorrect installation, tampering with the device and improper
connection, the validity of the product warranty will expire;
• For any repairs, contact Customer Service exclusively and request the use
of original spare parts;
• Disconnect the product from the power supply before performing any work
or maintenance on it.
Instructions
Power absorbed
See product data plate.
Dierential circuit breaker (life-saving)
The use of a residual current circuit breaker (earth leakage circuit breaker)
with trip current complying with current standards is recommended.
WARNING: The product must be connected to the power supply via an
omnipolar disconnection device that ensures a separation between contacts
complying with overvoltage category III. Such a device must withstand the
maximum loads connected and comply with current standards.
Warnings
• To avoid the risk of re or electrical shock, do not damage the plug or power cord;
• Do not connect the appliance to power strips, extension cords, or portable
power supplies;
• When the appliance is placed in the chosen location, make sure the power
cord is not stuck or damaged and that there are no power strips or portable
power supplies in the back of the appliance.
To Next Page
Loading...
