Candy Fresco - Page 21

19
10.4
10.5
Connection to the mains
10
Directions
• Make sure the electrical specications on the data plate are in conformity with
the power supply;
• The appliance operates on 220-240 Vac/50 Hz electric current.
• Abnormal voltage uctuations may cause the appliance not to start, damage
to the temperature control or compressor, or abnormal noises during opera-
tion. In such a case, an automatic regulator should be ed;
• Ensure that the main cable is not caught under the appliance during and
after transportation/movement, to prevent the main cable from being cut
or damaged. If the power cord of the appliance should be damaged, do not
proceed with the installation and contact service;
• Ensure that the power source, plug, and fuses are conform to the data on
the data plate;
• Make sure the power plug is grounded and do not use power strips or ex-
tension cords.
NOTE (United Kingdom only): The power cord of the appliance is equip-
ped with a 3-prong plug (grounded) suitable for a standard 3-prong outlet
(grounded). Never cut or remove the third prong (ground connection). After
installing the appliance, the plug must remain accessible
Other advice
The use of any household appliance requires adherence to certain basic rules:
• It is recommended to keep the plug clean: any dirt residue on the plug may cau-
se re;
• Do not pull the power cord to disconnect the appliance from the power sup-
ply while operating;
• Do not touch the appliance with wet or damp hands or feet;
• The use of adapters, power strips or extension cords is discouraged;
• In case of malfunction and/or performance drop, turn o the appliance and
do not manipulate/altere it.