Candy Side by Side - Space Requirement

10
1. Unscrew
hinge cover
by Philips
screwdriver.
2. disconnect
the harness.
•
Unscrew top
hinge.
• Lift the door
and place it
on a soft
pad. Then
remove
another
door as
same
process
•
Unscrew
bottom
hinges.
”. After the appliance is positioned! install the
doors as reversed process.
Space Requirement
• Select a location without direct exposure to
sunlight;
• Select a location with enough space for the
refrigerator doors to open easily;
• Select a location with level (or nearly level)
flooring;
• Allow sufficient space to install the refrigerator
on a flat surface;
• Allow clearance to the right, left, back and top
when installing. This will help reduce power
consumption and keep your energy bills lower.
At least
50 mm
At least
50 mm