Need help?Do you have a question about the Cannon MAGNUM 10 and is the answer not in the manual?
General| Type | Downrigger |
|---|---|
| Motor | 12V DC |
| Color | Black |
| Weight Capacity | 20 lb |
| Mounting | Gimbal |
| Material | Stainless Steel |
Responsibility for vessel operation and hazard avoidance.
Using approved accessories and keeping parts in place.
Caution against touching the spool during use.
Details of the lifetime warranty on specific parts.
Procedures for obtaining warranty service.
Factors to consider before mounting the downrigger.
List of tools and resources needed for installation.
Lists parts needed for base installation.
Visual steps for attaching the mounting base.
Using the base as a template and drilling pilot holes.
Steps for securing the base to the swivel and final assembly.
Lists parts and visual steps for boom assembly and attachment.
Steps for attaching the ball hook and extrusion.
Steps for securing and adjusting boom parts.
Final adjustments for ball hook and extrusion.
Lists parts for swivel head/boom end.
Steps for attaching the boom end.
Preparing the line and performing basic line routing.
Steps for assembling the terminator and routing the line through it.
Attaching snap swivel and routing line through terminator holes.
Detailed steps for routing the line through the terminator.
Managing line slack and routing the line along the final track.
Securing line tension and closing the terminator.
Wiring diagram for Magnum and TS models.
Troubleshooting steps for power and line counter problems.
Addressing clutch slippage and line type compatibility.
To Next Page
