Pedals are left- and right-specic. Locate the left and right markings
on the pedal spindles prior to installation.
Locate the bag of grease and carefully insert the threaded portion of
the pedal spindle into the bag.
Insert the right pedal (marked with R) into the right/drive side crank
arm and tighten with your ngers. Repeat with the left pedal (with an
L on it). Please note: Both pedals tighten in the direction of the front
wheel.
Tighten both pedals down very rmly using the provided pedal
wrench.
A.
C.
D.
A
B
C
D
SET-UP STEP 2STEP 1 STEP 3 PRE-RIDE CHECK
To Next Page
Loading...
