Canon A2 - Page 22

4. Selecting the Shutter Speed and
Shooting
e When you perform continuous photography, use a shutter
speed of 1/60 to 1/1000 second.
e For single frame photography, any shutter speed can be
used.
” If using the AE-1 PROGRAM with the shutter speed selec-
tor dial set to “PROGRAM” (programmed AE), sequential
shooting is possible if the aperture indicated in the view-
finder is 4 or smaller, i.e., 5.6, 8, 11, etc.
* When the Power Winder A2 is used with the Canon A-1,
sequential shooting is not possible when in the stopped-
down AE mode.
* The main switch of the Power Winder A2 must be turned off
to make multiple exposures with the Canon A-1.
22