Canon A2 - Remote Control Shooting

7. Remote Control Shooting
e Since the Power Winder A2 has a remote control socket for
use with the A-1 and AE-1 PROGRAM, shooting from a dis-
tance is possible via the socket with Remote Switch 3 or
60, or Wireless Controller LC-1, or Interval Timer TM-1
Quartz (optional accessories).
e Make sure the winder's main switch has been turned to
“OFF” before connecting the accessory. (The shutter might
be released once if the accessory is connected when the
winder's main switch is at any setting other than "OFF').
e When the Power Winder A2 is mounted on an AL-1, AE-1,
AV-1 or AT-1, remote control shooting is not possible.
26