EasyManua.ls Logo

Canon Aplio i600 User Manual

Canon Aplio i600
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
No. 2B771-191EN*Q
CAUTION:
In the USA, federal law restricts this device to sale
and use by or on the order of a physician.
IMPORTANT!
Read and understand this manual before operating
the equipment. After reading, keep this manual in
an easily accessible place.
CANON MEDICAL SYSTEMS CORPORATION 2017-2021
ALL RIGHTS RESERVED
Issued: 2021-01
OPERATION MANUAL
FOR
DIAGNOSTIC ULTRASOUND SYSTEM
MODEL TUS-AI600
[FUNDAMENTALS]
(2B771-191EN*Q)
For cleaning and disinfection, only the following maintenance items are extracted.
20.3 Preventive Maintenance Performed by the User
Question and Answer IconNeed help?

Do you have a question about the Canon Aplio i600 and is the answer not in the manual?

Canon Aplio i600 Specifications

General IconGeneral
Ultrasound TypeDiagnostic Ultrasound System
Transducer Ports4 active ports
ApplicationsVascular, Obstetrics/Gynecology, Pediatrics, Musculoskeletal
Imaging ModesB-mode, M-mode, Color Doppler, Power Doppler
Display23-inch LCD monitor
Touch PanelYes
Transducer TypesConvex, Linear, Phased Array, Volume
Advanced ImagingShear Wave Elastography, Contrast Imaging
PortabilityCart-based system
Power Supply100-240 VAC
Power Requirements50/60 Hz
ConnectivityDICOM, USB, Ethernet, HDMI
Frequency Range1.0 MHz to 18.0 MHz (dependent on transducer)

Summary

Preventive Maintenance Performed by the User

Cleaning the System

Covers procedures for cleaning various system components.

Cleaning the Transducer

Instructions for cleaning, disinfecting, and sterilizing the transducer.

Cleaning the Transducer Holder and Gel Holder

Wiping off stains from the transducer holder and gel holder.

Cleaning the Reference Signal Cable

Procedures for cleaning organic materials from the reference signal cable.

Cleaning the ECG Limb Clips

Instructions for cleaning ECG limb clips (clip-type electrodes).

Cleaning PCG and Pulse Sensors

Cleaning organic materials from PCG and pulse sensors.

Cleaning the Monitor

Guide for cleaning the system's monitor cover and LCD screen.

Cleaning the Touch Panel Surface

Methods for cleaning the touch panel surface.

Cleaning System, Panel, and Connector

Wiping the system, main panel, and transducer connector.

Trackball Cleaning Procedure

Detailed steps for removing, cleaning, and reassembling the trackball.

Disinfecting the System

Permitted Disinfection Chemicals

Lists chemicals approved for disinfecting the system.

Non-Disinfectable Areas

Identifies parts of the system that should not be disinfected.

System Disinfection Procedures

Step-by-step guide for performing system disinfection.

Related product manuals