What to do if the leading edge of media is not straight on Canon Printer?
If the leading edge of the media roll loaded in the drawer isn't cut straight, the Canon Printer might fail to detect the leading edge or could print on the platen. Ensure the leading edge is straight.
General| Print Technology | UVgel |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Maximum Print Width | 64 inches |
| Maximum Media Thickness | 0.8 mm |
| Ink Type | UVgel ink |
| Ink Configuration | CMYK |
| Connectivity | Ethernet |
| Print Speed (High Quality) | 16 m²/h |
| Print Speed (Maximum) | 40 m²/h |
| Operating System Compatibility | Windows |
Provides critical safety and environment information for users before operating the system.
Explains how to manage media profiles within the RIP software (ONYX/Caldera).
Provides instructions for loading media rolls into the printer.
Describes the process of calibrating media for optimal print quality.
Provides instructions on submitting and printing a job via the RIP.
Details regular printhead and system maintenance for optimal printer condition.
Explains how to refill ink cartridges easily without risk of spilling.
Describes the workflow to solve quality problems and improve print output.
Explains how to optimize printhead performance and color density.
Guides on aligning the printhead carriage to fix blurred or fuzzy images.
Details how to change network configuration settings on the user panel and settings editor.
Explains how to configure, download, and install software updates from On Remote Service.
Provides steps for common troubleshooting scenarios like stopping or restarting the printer.
Offers solutions for common print quality issues like banding and graininess.
To Next Page