Need help?Do you have a question about the Canon E3400 Series and is the answer not in the manual?
Explains the meaning of symbols used throughout the manual for clear understanding.
Lists registered trademarks and license information for software components.
Describes the different ways to connect the printer to a network.
Outlines limitations and important notes for network connectivity.
Details the utility for diagnosing and repairing network status.
Instructions on how to load various types of paper into the printer.
Step-by-step instructions for replacing ink cartridges.
Important safety notices and precautions for using the printer.
Information regarding electromagnetic interference and compliance.
Important notices regarding the physical handling of the printer.
Instructions on how to safely pack and transport the printer.
Advice on maintaining optimal print quality and printer performance.
Identifies and describes the printer's key physical parts.
Information on connecting and managing the printer's power.
Explains the meaning of icons and indicators displayed on the printer's LCD.
Steps to adjust printer settings via the computer for Windows users.
Guide to modifying printer settings using the printer's control panel.
Provides technical details like interface, environment, and dimensions.
Lists the required operating system and disk space for driver installation.
Details the types of paper and media compatible with the printer.
Instructions on how to handle paper to maintain print quality and prevent jams.
Explains how to print documents from a computer.
Details how to register paper size to prevent misprints.
Step-by-step guide for making copies on plain paper.
Instructions for performing copies using photo paper.
Instructions for scanning documents from a Windows computer.
Explains how to use ScanGear for advanced scanning and image correction.
Troubleshooting for problems with wireless LAN connections.
Troubleshooting for issues with Wireless Direct connection.
Steps to resolve issues where the printer does not print at all.
Troubleshooting steps when ink is not being ejected from the print head.
Solutions for poor print quality like streaks or misaligned lines.
Steps to take when the scanner or printer is not functioning.
Troubleshooting for when the ScanGear software fails to launch.
Steps to resolve issues where the printer does not power on.
Troubleshooting steps for issues related to USB connectivity.
Steps to resolve issues during MP Drivers installation on Windows.
Explains how to handle errors displayed on the computer screen.
Details on interpreting and responding to error messages and support codes.
Specific instructions for clearing paper jams from the rear tray or output slot.
Steps to remove paper jammed internally, including under the FINE cartridge holder.
Lists potential reasons for the "1000" error code.
Instructions for resolving "No Paper" errors during initial setup.
Indicates the printer cover was opened during printing.
Steps to resolve cover open errors, including reprinting.
Indicates that the FINE cartridge is not installed.
Instructions to install the FINE cartridge or contact service.
Indicates that the FINE cartridge cannot be recognized.
Instructions to remove, reinstall, or replace the FINE cartridge.
Indicates that the appropriate ink cartridge is not installed.
Instructions to install the correct ink cartridge.
Indicates that the FINE cartridge cannot be recognized.
Instructions to replace the FINE cartridge.
Indicates that the ink may have run out.
Instructions on how to continue printing with low ink or replace cartridge.
Indicates that the ink has run out.
Instructions to replace ink cartridge and continue printing.
Possible reasons for FINE cartridge installation issues.
Steps to install the FINE cartridge correctly.
Indicates that the ink absorber is almost full.
Instructions to press OK to continue printing or contact service.
Indicates that shipping tape or protective material is attached to the cartridge holder.
Instructions to remove shipping tape and protective material.
Indicates that paper size settings do not match between driver and printer.
Instructions to cancel and correct media/paper size settings.
Indicates that scanning the print head alignment sheet failed.
Steps to resolve print head alignment sheet scanning errors.
Indicates the printer is waiting to scan the alignment sheet.
Instructions to load and scan the print head alignment pattern.
Indicates that media type and paper size are not set correctly.
Instructions to cancel and correct media/paper size settings.
Indicates that printing cannot be performed with current settings.
Instructions to cancel and change print settings.
Indicates a general printer error has occurred.
Instructions to turn off/on the printer or contact service.
Indicates a general printer error has occurred.
Instructions to turn off/on the printer or contact service.
Indicates a general printer error has occurred.
Instructions to check FINE cartridge holder motion and installation.
Indicates a general printer error has occurred.
Instructions to turn off/on the printer or contact service.
Indicates a general printer error has occurred.
Instructions to contact service for repair.
Indicates a general printer error has occurred.
Instructions to remove paper jams or contact service.
To Next Page
General