To Next PageTo Next Page
Need help?Do you have a question about the Canon ELURA 2 MC and is the answer not in the manual?
General| Type | Camcorder |
|---|---|
| Camcorder Type | MiniDV |
| Recording Media | MiniDV tape |
| Media Format | DV |
| Optical Zoom | 10x |
| Zoom | 10x optical, 200x digital |
| Digital Zoom | 200x |
| LCD Screen Size | 2.5 inches |
| Weight | 520g (without battery) |
| Viewfinder | Color electronic viewfinder |
| Image Stabilization | Electronic |
| Focus | Auto/Manual |
| Exposure Control | Auto/Manual |
| Microphone | Stereo |
| Video Resolution | 720 x 480 |
| LCD Screen | 2.5-inch color LCD |
| Image Sensor | 1/4-inch CCD |
| Sensor | 1/4-inch CCD |
| White Balance | Auto |
| Shutter Speed | 1/60 sec |
| Audio Recording | 16-bit |
| Interface | IEEE 1394 (FireWire) |
| Battery | Lithium-ion |
Alerts and advisories regarding product safety, fire, and electric shock risks.
Covers 13 critical safety points for handling, operation, and environment.
Explains storage and management of still images on memory cards.
Diagram illustrating the location and function of buttons, dials, and ports.
Step-by-step guide to connect the camcorder to an AC outlet for power.
Step-by-step guide for properly loading and unloading a cassette.
Checks and steps to take before starting a recording session.
Instructions on how to begin recording and pause the process.
Explanation of the 10x optical zoom and up to 40x digital zoom capabilities.
How to view recordings directly on the camcorder's LCD screen.
Details on using buttons for play, stop, fast forward, and rewind during playback.
Procedure for configuring the time zone and daylight saving time settings.
Procedure for capturing a still image while video recording is active.
How to capture a still image when the camcorder is in record pause mode.
Table showing function availability across different recording programs.
How to choose between 16-bit and 12-bit audio recording modes.
How to set the self-timer for movie recording with a countdown.
How to use the self-timer for capturing still photographs.
Procedure for locking the current exposure level to maintain consistent brightness.
How to manually brighten or darken the image using the SELECT dial.
Steps to select desired shutter speeds from AUTO to 1/2000 sec.
How to lock focus at a specific point and disable autofocus.
Using the SELECT dial to adjust focus manually for near or far subjects.
Using preset modes (Indoor, Outdoor, Auto) or manual adjustment.
Steps for transferring segments from the camcorder to a VCR for editing.
Procedure for dubbing video to or from other digital equipment.
Connecting and recording from analog video devices using line-in.
Guidance on adding audio using internal/external mics or audio inputs.
Explains basic operations like recording, viewing, protecting, and erasing images.
Procedure for safely inserting and removing the MMC from the camcorder.
Steps for setting the POWER dial and using the PHOTO button for capture.
How to view images one by one using the CARD +/- buttons.
Steps to mark images for protection, preventing them from being erased.
Procedure for erasing individual still images from the MMC.
Steps for formatting the MultiMediaCard, including confirmation.
Important warnings about handling, formatting, and using MMCs to prevent data loss.
Table showing time needed for recharge and recording times for different batteries.
How to interpret the battery level indicator in the display.
Procedure for inserting the CR1616 lithium battery for memory backup.
Critical safety information regarding battery handling, storage, and potential hazards.
What happens when condensation is detected and how the camera indicates it.
Steps to take to resolve condensation issues, including drying the camera.
Troubleshooting for issues like no power, cassette errors, and playback failures.
Further troubleshooting for digital effects, playback buttons, and screen artifacts.
Solutions for problems related to MMC insertion, errors, and capacity.
Solutions for wireless controller issues, power indicator, malfunctions, and heat.
