Canon EOS 66 User Manual

Imprinting the Date or Time (QD Model only)
Setting the Date and Time
To set the date or time, follow the procedure below.
REC
r
-N
1
--
M
1 o •
• iC *
_ <
_y
Select the date or time display.
• Press the <MODE> button.
Select the digit to be set.
• Press the <SELECT > button until the
digit blinks.
Set the correct number.
• Keep pressing the <SET> button
until the correct number appears.
Finalize the setting.
• Keep pressing the <SELECT > button
until no digits blink.
Replacing the Quartz Date Back’s Battery
When the date/time on the imprinted photograph looks faded, replace the
CR2025 lithium battery as follows. Battery life Is about 3 years.
Remove the battery compartment cover.
• Open the camera back and loosen
the screw as shown in the illustration.
Insert a new battery.
• The battery’s positive contact (+)
must face up.
Reattach the battery compartment cover.
• Set the correct date and time.
Take out the battery.
36

Canon EOS 66 Specifications

General

Brand	Canon
Model	EOS 66
Category	Film Camera
Language	English