516
You can check the conditions of the battery you are using on the LCD
monitor. Each Battery Pack LP-E6N/LP-E6 has a unique serial number,
and you can register multiple battery packs to the camera. When you
use this feature, you can check the registered batteries’ approximate
remaining capacity and usage history.
Select [Battery info.].
Under the [54] tab, select [Battery
info.], then press <0>.
X The battery information screen will
appear.
3 Checking the Battery Information
Battery model or household power source
being used.
The battery level indicator (p.48) is displayed
together with the remaining battery level
shown in 1% increments.
The number of shots taken with the current
battery. The number is reset when the battery
is recharged.
Battery’s recharge performance level is
displayed in three levels.
(Green) : Battery’s recharge
performance is good.
(Green) :
Battery’s recharge performance
is slightly degraded.
(Red) : Purchasing a new battery is
recommended.
Battery position
Using a genuine Canon Battery Pack LP-E6N/LP-E6 is recommended. If
you use batteries that are not genuine Canon products, the camera’s full
performance may not be attained or malfunction may result.
The shutter count is the number of still photos taken. (Movie shooting is
not counted.)
The battery information will also be displayed when using Battery Grip
BG-E21 (sold separately).
If a battery communication error message is displayed, follow the
instructions in the message.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
