Using the Menus
34
• The orange selection frame will appear on a menu item in the submenu.
• Press the BACK button to return to the previous submenu.
4 Push the joystick up/down or turn the SELECT dial to select the desired menu item (in the example
[Language
H
]).
• If a submenu contains many menu items, a scroll bar will appear on the right side of the submenu indicating
that you must scroll up or down to see other menu items.
•A
Ð
mark to the right of a menu item indicates another submenu. Repeat steps 3 and 4.
5 Push the joystick right or press SET.
• The orange selection frame will appear on a setting option.
• Press the BACK button to return to the previous submenu.
6 Push the joystick up/down or turn the SELECT dial to select the desired setting option and then
press SET.
• Depending on the menu item, additional selections may be necessary.
7 Press the EVF button twice* (optional viewfinder only) or the MENU button once (RC-V100 only) to
close the menu.
* Only once when the [EVF-V70] submenu is being displayed.
• Unavailable items may appear grayed out.
• On some screens, the or icon may appear with some guidance text. Press SET or press the BACK
button, respectively, to perform the action displayed.
• You can check some of the current settings on the camera’s information screens (A 198).
• When the HDMI OUT terminal’s resolution is set to 4096x2160 or 3840x2160, the monitoring menu will not be
displayed on the monitor connected to the HDMI OUT terminal.
To Next Page