5.
Select a registered file name.
Select [File name], then choose a registered file name.
Caution
An underscore (“_”) cannot be used as the first character.
Note
User setting 2
Shooting after you have selected “*** + image size” (as registered to User setting 2)
will add a character representing the current image size to your file name as the
fourth character. Meanings of added characters are as follows.
“***L”: , , , or
“***M”: or
“***S”: or
“***T”:
“***C”:
The automatically added fourth character enables you to determine image sizes
without opening the files after transferring them to a computer. Based on file
extensions, you can also distinguish RAW, JPEG, and HEIF images.
629
To Next Page
Loading...
