5.
Save.
Turn the < > dial to select [ ], then press < >.
Select [OK] to save the cropped image.
Check the destination folder and image file number, then select [OK].
To crop another image, repeat steps 2 to 5.
Caution
The position and size of the cropping frame may change depending on the angle
set for tilt correction.
Once a cropped image is saved, it cannot be cropped again or resized.
AF point display information ( ) and Dust Delete Data ( ) will not be appended
to the cropped images.
Available aspect ratios vary depending on whether you use [ : Cropping] or
[
: Add cropping information].
518
To Next Page
Loading...
