Wi-Fi Connection via Access Points
Camera Access Point Mode
Manual IP Address Setup
This section describes how to join a Wi-Fi network via an access point compatible with WPS
(PBC mode).
First, check the position of the WPS button and how long to press it. It may take approx. 1
min. to establish a Wi-Fi connection.
1.
Set Wi-Fi settings to [Enable].
See steps 1–4 in Connecting to a Bluetooth-Compatible Smartphone
via Wi-Fi.
2.
Select [
: Wi-Fi/Bluetooth connection].
3.
Select an option.
If the history ( ) is displayed, switch screens with the < > < >
dial or < >.
636
To Next Page
Loading...
