P: Program AE
The camera automatically sets the shutter speed and aperture value to suit the subject's
brightness.
* < > stands for Program.
* AE stands for Auto Exposure.
1.
Set the Mode dial to
<
>.
2.
Focus on the subject.
Aim the AF point over the subject and press the shutter button halfway.
Once the subject is in focus, the AF point turns green (with One-Shot
AF).
The shutter speed and aperture value are set automatically.
3.
Check the display.
As long as the exposure value is not blinking, standard exposure will be
obtained.
4.
Take the picture.
Compose the shot and press the shutter button completely.
99
To Next Page
Loading...
