138
Function settings particular to Live View shooting are explained here.
If you press the <Q> button while the image is displayed on the LCD
monitor in a Creative Zone mode, you can set any of the following: AF
method, Drive/self-timer, White balance, Picture Style, Auto Lighting
Optimizer, Image-recording quality, and ISO speed. In Basic Zone
modes, you can set the AF method and the settings shown in the table
on page 72.
1
Press the <Q> button.
X The functions settable with Quick
Control will appear on the left of the
screen.
If the AF method is <f>, the AF
point will also be displayed. You can
also select the AF point (p.148).
2
Select a function and set it.
Press the <W> <X> keys to select a
function.
X The selected function and Feature
guide (p.53) will appear.
Press the <Y> <Z> keys or turn the
<6> dial to set the function.
Pressing <0> will display the
respective function setting screen.
3
Exit the setting.
Press the <Q> button to return to
Live View shooting.
Shooting Function Settings
Q Quick Control
In Creative Zone modes, if [10: Flash button function] is set to [1: ISO
speed] in [5:3 Custom Functions (C.Fn)], you can raise the built-in flash
with Quick Control. The ISO speed will be set with the <D> button.
To Next Page
Loading...
