149
Using AF to Focus (AF Method)
3
Focus on the subject.
Aim the AF point over the subject and
press the shutter button halfway.
X The Live View image will turn off, the
reflex mirror will go back down, and
AF will be executed. (No picture is
taken.)
X When focus is achieved, the AF point
that achieved focus will turn green
and the Live View image will
reappear.
X If focus is not achieved, the AF point
will turn orange and blink.
4
Take the picture.
Check the focus and exposure, then
press the shutter button completely to
take the picture (p.134).
You cannot take a picture during autofocusing. Take the picture while the
Live View image is displayed.
To Next Page
Loading...
