Need help?Do you have a question about the Canon Finisher-W1 PRO and is the answer not in the manual?
Provides crucial information and disclaimers regarding the use and content of the manual.
Details the various symbols used throughout the service manual for clarity.
Lists registered trademarks and copyright information for the product and documentation.
Details technical specifications for the finisher, including paper size, weight, and capacity.
Identifies key external and internal components of the finisher unit.
Describes optional units that can be incorporated with the finisher.
Explains the fundamental block structure and control units of the finisher.
Details the operational controls and functions of various units within the finisher.
Describes the sensors and procedures for identifying and clearing paper jams.
Provides instructions for upgrading the firmware of the finisher controller PCB.
Provides comprehensive lists of all replaceable parts and their locations.
Illustrates and lists components like sensors, motors, PCBs, switches, and fans.
Details the removal and replacement procedures for key assemblies like stacking and feed units.
Covers fundamental adjustments for optimal finisher performance.
Outlines necessary adjustments after replacing specific components.
Details additional adjustments for fine-tuning finisher operations.
Covers initial checks, unpacking, and required space for installation.
Step-by-step guide for physically installing the finisher.
Details connections to host machines and other optional units.
Instructions for adjusting physical height and applying labels.
Lists required tools, solvents, and lubricants for service operations.
Provides detailed electrical circuit diagrams for the finisher.
General| Booklet Finishing | Yes |
|---|---|
| Type | Finisher |
| Paper Size | A3, A4 |
| Paper Weight | 52 to 300 gsm |
| Stapling Positions | Corner, Double |
| Hole Punching | 2-Hole / 4-Hole (Option) |
| Multi-folding | Yes |
| Stapling Modes | Saddle stitch |
To Next Page
