Need help?Do you have a question about the Canon Paper Deck Unit-F1 and is the answer not in the manual?
General| Type | Paper Deck Unit |
|---|---|
| Model | F1 |
| Paper Weight | 52 to 220 g/m² |
| Paper Sizes | A4 |
| Weight | Approximately 37 kg |
| Power Source | From the Main Unit |
General information regarding the manual's purpose, corrections, trademarks, copyright, and cautions.
Defines the various symbols used throughout the service manual for operational clarity.
Highlights the key capabilities and advantages of the paper deck unit.
Lists detailed technical specifications of the paper deck unit.
Identifies external and internal components of the paper deck unit.
Describes optional equipment that can be attached to the paper deck unit.
Explains the main functional blocks and electrical control system.
Details the arrangement of rollers, sensors, and drive components.
Provides an overview of the control functions including paper feeding and detection.
Explains how paper levels are detected and indicated.
Explains the operation of the paper compartment's open/close mechanism.
Describes the power source and its distribution within the unit.
Explains how paper jams are detected and handled.
Information on how software or firmware upgrades are performed.
Outlines routine maintenance tasks and their recommended intervals.
Instructions for detaching the paper deck unit from the host machine.
Procedures for removing the outer casing parts of the unit.
Guidance on replacing wear parts and cleaning operational areas.
Step-by-step guide for replacing the deck feed roller.
Step-by-step guide for replacing the deck pickup roller.
Step-by-step guide for replacing the deck separation roller.
Covers the removal of major internal assemblies.
Detailed procedure for removing the pickup assembly.
Step-by-step guide for removing the paper compartment.
Identifies and details the removal of solenoids.
Identifies and details the removal of motors.
Details the removal and installation of the lifter wire assembly.
Identifies and details the removal of printed circuit boards.
Procedures for adjustments after replacing specific components.
Adjustments related to the front cover positioning and gaps.
Adjustment procedures for the pickup assembly, including pre-separation plate.
Covers adjustments not directly tied to part replacement.
Procedure to adjust the pressure spring of the deck separation roller.
Pre-installation checks for the installation site and environment.
Steps for safely unpacking the unit and verifying all parts.
Comprehensive step-by-step guide to install the paper deck unit.
Procedures to verify correct installation and operation.
Methods for checking and adjusting the paper's position in the output image.
Lists recommended tools, solvents, and oils for maintenance.
Provides the electrical schematic diagram of the paper deck unit.
To Next Page
