19
Configuring with WPS Features (Pin Code Mode)
<< Previous Next >>
9. Wait until the machine sets the IP address automatically (approx. 2
min).
The machine sets the IP address automatically and connects to the network.
If you want to set the IP address manually, see the following.
•e-Manual “Setting the IP Address (IPv4)
•
e-Manual “Setting the IP Address (IPv6)
Automatic obtaining of the IP address (Auto IP)
By
defaul
t, <DHC
P> and <Auto IP> are enable
d
Even if you do not set the IP address manually, this machine can obtain it automatically.
•Even if you do not have a dedicated device such as a DHCP server, the IP address is obtained automatically.
•The <DHCP> setting is prioritized over <Auto IP>
When your computer is set to a static IP address, assign a static IP address to the machine manually.
Next, Click Here
To Next Page
Loading...
