Need help?Do you have a question about the Canon imagePRESS Server G250 V2 and is the answer not in the manual?
Describes the manual's purpose for qualified persons to learn technical theory, installation, maintenance, and repair.
Explains how Canon handles technical inaccuracies or typographical errors and issues new editions.
Lists registered trademarks owned by various companies and their usage under license.
States that the document belongs to Canon Inc. and cannot be copied without consent.
Advises that the manual's use should be supervised to avoid disclosure of confidential information.
Provides an overview of the imagePRESS Server's capabilities and connectivity.
Lists the essential tools and parts required for installing or servicing the imagePRESS Server.
Details safety information for operating and servicing the imagePRESS Server and avoiding damage.
Lists the key hardware specifications of the imagePRESS Server, including resolution, memory, and OS.
Specifies the version of the system software installed on the imagePRESS Server.
Provides procedures for starting, shutting down, rebooting, and restarting the imagePRESS Server.
Introduces the chapter on inspecting, removing, reseating, or replacing major hardware components.
Provides an overview of the internal components of the imagePRESS Server through figures.
Details the procedure to disconnect the server from the printer and open it for inspection and service.
Guides on checking and reseating internal cable connections to troubleshoot problems.
Describes how to remove and install replaceable parts like the printer interface board, DIMM, and motherboard.
Covers proper handling and procedures for removing and replacing the hard disk drive.
Explains how to complete inspection and service by reinstalling and verifying the imagePRESS Server.
Instructions on installing system software if a new version is required, HDD is replaced, or problems occur.
Provides key considerations for installing system software, including compatibility and backup.
Details procedures for backing up and restoring the system configuration to an earlier state.
Explains how to use Fiery System Restore for quick recovery, including scheduled backups.
Guides on preparing a USB flash drive as a bootable device for system software installation.
Provides steps to install system software using a prepared USB flash drive.
Describes how to print Configuration pages listing installed options and setup.
Identifies common problems and suggests ways to correct them, starting with obvious causes.
Describes initial visual checks for common hardware problems like faulty or loose connections.
Provides a table of common symptoms, possible causes, and suggested actions for troubleshooting.
Explains how dust accumulation on fans can cause problems and how to clean internal components.
Guides on collecting troubleshooting information like Job Error Reports and System Logs.
Covers essential pre-installation steps, including license installation and IP address configuration.
Lists critical items to check and perform before commencing the installation procedure.
Illustrates the physical layout and components involved in the installation process.
Provides step-by-step instructions for installing hardware components like the Open I/F PCB.
Details the process of installing the main imagePRESS Server unit.
Covers post-installation configurations, including web browser display settings.
Describes how to verify the installation and settings by checking the server's operation.
Instructs to connect to the network and make necessary settings with the network administrator.
Guides on performing image quality adjustments required after installation.
Describes the manual's purpose for qualified persons to learn technical theory, installation, maintenance, and repair.
Explains how Canon handles technical inaccuracies or typographical errors and issues new editions.
Lists registered trademarks owned by various companies and their usage under license.
States that the document belongs to Canon Inc. and cannot be copied without consent.
Advises that the manual's use should be supervised to avoid disclosure of confidential information.
Provides an overview of the imagePRESS Server's capabilities and connectivity.
Lists the essential tools and parts required for installing or servicing the imagePRESS Server.
Details safety information for operating and servicing the imagePRESS Server and avoiding damage.
Lists the key hardware specifications of the imagePRESS Server, including resolution, memory, and OS.
Specifies the version of the system software installed on the imagePRESS Server.
Provides procedures for starting, shutting down, rebooting, and restarting the imagePRESS Server.
Introduces the chapter on inspecting, removing, reseating, or replacing major hardware components.
Provides an overview of the internal components of the imagePRESS Server through figures.
Details the procedure to disconnect the server from the printer and open it for inspection and service.
Guides on checking and reseating internal cable connections to troubleshoot problems.
Describes how to remove and install replaceable parts like the printer interface board, DIMM, and motherboard.
Covers proper handling and procedures for removing and replacing the hard disk drive.
Explains how to complete inspection and service by reinstalling and verifying the imagePRESS Server.
Instructions on installing system software if a new version is required, HDD is replaced, or problems occur.
Provides key considerations for installing system software, including compatibility and backup.
Details procedures for backing up and restoring the system configuration to an earlier state.
Explains how to use Fiery System Restore for quick recovery, including scheduled backups.
Guides on preparing a USB flash drive as a bootable device for system software installation.
Provides steps to install system software using a prepared USB flash drive.
Describes how to print Configuration pages listing installed options and setup.
Identifies common problems and suggests ways to correct them, starting with obvious causes.
Describes initial visual checks for common hardware problems like faulty or loose connections.
Provides a table of common symptoms, possible causes, and suggested actions for troubleshooting.
Explains how dust accumulation on fans can cause problems and how to clean internal components.
Guides on collecting troubleshooting information like Job Error Reports and System Logs.
Covers essential pre-installation steps, including license installation and IP address configuration.
Lists critical items to check and perform before commencing the installation procedure.
Illustrates the physical layout and components involved in the installation process.
Provides step-by-step instructions for installing hardware components like the Open I/F PCB.
Details the process of installing the main imagePRESS Server unit.
Covers post-installation configurations, including web browser display settings.
Describes how to verify the installation and settings by checking the server's operation.
Instructs to connect to the network and make necessary settings with the network administrator.
Guides on performing image quality adjustments required after installation.
General| Memory | 16 GB |
|---|---|
| Network Interface | Gigabit Ethernet |
| Network Protocol | TCP/IP |
| USB Ports | 4 x USB 3.0 |
| Weight | Approx. 15 kg |
| Power Consumption | 400W |
| Supported PDL | PostScript, PCL, PDF, XPS |
To Next Page
