4
Caution
● When setting the printer down temporarily, make sure to put the printer
on a flat, stable surface.
● Supporting only the center of the printer when carrying or setting the
printer down may damage the printer.
4
Place the printer on the stand such that their positions are
aligned as shown in the diagram.
Important
● If you are not using a stand, place the printer in the installation
location and proceed to "
3
Turning On the Printer".
5
Ax the printer to the stand using the included screws.
● Affix using screws at 2 locations each on the left and right
sides of the stand as shown in the diagram.
To Next Page
Loading...
