13
Congure Wi-Fi Settings on the Printer
1
Once the print head adjustment has
nished, check that the following screen
appears and select OK.
Note
• If the following message appears,
the printer initial settings are not
nished. Wait until the above screen
appears.
Checking the nozzle.
Preparing the ink system.
Cleaning...
2
Select the connection method.
Congure the Wi-Fi settings by following
the instructions on the screen.
3
When the home screen appears and
(Network) appears, the Wi-Fi settings are
complete.
Note
• Before using the printer, the
software needs to be installed on
the computer that is connected to
the printer.
Proceed to "Connecting to the
Printer" on p.12.
If you selected No in step 3 for Wi-Fi connection on p.11, congure the Wi-Fi settings using the touch screen of the printer.
A: Accessory pocket
• Can be used to store accessories such as the 3-inch paper core
attachment.
• The accessory pocket is included with the stand.
Refer to "Attach the Accessory Pocket" in the Printer Stand
Setup Guide (separate manual) for details on how to attach.
B: Cleaning brush
• When you open the top cover, a cleaning brush is stored on the
right side. Use it when cleaning inside the top cover.
A
B
Storing Accessories
Printing From a Smartphone or Tablet
Loading Roll Paper After Setup
With the “Canon PRINT Inkjet/SELPHY” application software, you can easily, wirelessly print photos stored on your smartphone
or tablet (running iOS or Android).
You can download this application by accessing the QR code to the right.
To load roll paper after setup, on the home screen, select Load paper and then Load roll paper, and follow the instructions on the screen.
For details, refer to the Online Manual. => "Displaying the Online Manual" on p.14
To Next Page
Loading...
Need help?
General
