Canon imageRunner 2004N User Manual

Fixing Assembly
1053-087
Dirt may adhere to the xing assembly inside the machine and cause black streaks to appear on printouts. To clean
the xing assembly, perform the following procedure. Note that you cannot clean the xing assembly when the
machine has documents waiting to be printed. To clean the xing assembly, you need A4 or Letter size paper. Set the
paper in the paper drawer or multi-purpose tray before performing the following procedure.
● Cleaning requires toner. Make sure that there is sucient toner remaining beforehand.
● It takes approximately 90 seconds to clean the xing assembly.
Checking Toner Level(P. 542)
Loading Paper in the Multi-Purpose Tray(P. 46)
1
Press and tap <Menu>.
2
Tap <Adjustment/Maintenance>.
3
Tap <Clean Fixing Assembly>.
4
Load paper (A4 or LTR) in the multi-purpose tray, and tap <OK> <Start>.
● A sheet for cleaning the xing assembly is printed.
Follow the instructions on the screen to place the sheet for cleaning with the side to be printed face up in
the multi-purpose tray, and then press <OK>.
Maintenance
539

Canon imageRunner 2004N Specifications

General

Print Technology	Laser
Print Speed	20 ppm (A4)
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Connectivity	USB 2.0, Ethernet
Functions	Print, Copy, Scan
Duplex Printing	Manual
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	10, 000 pages
Memory	128 MB
Supported Paper Sizes	A4, A5, B5, Legal, Letter
Operating System Compatibility	Windows, Mac