Customizing the Copy Settings
4-2
Customizing Settings
4
Customizing the Copy Settings
You can change the machine’s default settings and customize them to suit your
needs. The settings you change and store in the Copy Settings in the Additional
Functions menu are not returned to the factory default settings even when
(Reset) is pressed. For instructions on how to restore the settings to the
factory default settings, see “Restoring the Default Copy Settings,” on p. 4-7.
Copy Settings Table
The following table lists the settings in the Copy Settings menu. The default settings
are indicated in bold.
Auto Orientation
If the Auto Orientation setting is set to ‘On’, the machine uses information such as
the size of the original and the copy ratio to determine the most suitable orientation
for the paper size, and then automatically rotates the image, if necessary. If this
mode is set in combination with the Auto Paper Selection mode, the machine
automatically selects the optimal paper to use, regardless of its orientation. (See
“Automatic Paper Selection,” on p. 2-2)
NOTE
• The default Settings is ‘On’.
• Even if the Auto Orientation setting is set to ‘On’, the image is not rotated when:
- The paper size is selected manually.
- The Different Size Originals mode is set in combination with the Auto Paper
Selection mode.
- The size of the original is not detected.
- A4 or A5 originals are enlarged onto A3 paper.
• Only standard size originals that are A4 or smaller can be rotated when the copy ratio
is set to 100%.
Item Settings Page
Auto Orientation On, Off p. 4-2
Standard Settings Store, Initialize p. 4-4
Initialize Copy Settings Yes, No p. 4-7
To Next Page
Loading...
Need help?
General
