Card Reader-C1
3-33
3
Optional Equipment
Procedure after Using the Machine
1
After you finish using the machine, remove the control card.
The touch panel display returns to the screen for inserting the control card.
IMPORTANT
Once you have removed the control card, you cannot operate the machine until the
control card is inserted again.
Department ID Management
This section describes how to change the password and page limit, and how to
check the print totals when a control card is being used.
NOTE
The maximum number of digits that you can store for the password is seven. If you enter
fewer than seven digits, the machine stores the password with leading zeros.
- Example: If <321> is entered, <0000321> is stored.
Flow of Additional Functions Operations
This section describes the flow of Additional Functions operations when the
optional Card Reader-C1 is attached.
NOTE
Settings specified from the Additional Functions screen are never changed when you
press (Reset).
To Next Page
Loading...
Need help?
General
