Need help?Do you have a question about the Canon imageRUNNER ADVANCE C3530i II and is the answer not in the manual?
General| Print Technology | Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Scan Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Maximum Paper Capacity | 2, 300 sheets |
| Duplex Printing | Yes |
| Hard Disk Drive | 250 GB |
| Functions | Print, Copy, Scan |
| Print Speed (Black) | 30 ppm |
| Print Speed (Color) | 30 ppm |
| Copy Speed (Black) | 30 ppm |
| Copy Speed (Color) | 30 ppm |
| Standard Paper Capacity | 550 sheets |
| Supported Paper Sizes | A3, A4, A5, B4, B5, Legal, Letter |
| Automatic Document Feeder | 100 sheets |
| Connectivity | USB, Ethernet, Wi-Fi |
| Mobile Printing Support | Apple AirPrint, Mopria, Google Cloud Print |
| Weight | 85 kg |
| First Print Out Time (Black) | 5.9 seconds |
| Processor Speed | 1.75 GHz |
| Memory (Standard) | 3 GB RAM |
Review machine status, firmware, history, and consumables before customer visit.
Discuss machine performance with the customer and confirm reported issues.
Validate machine serial number and execute the COM-TEST diagnostic.
Analyze service logs, software versions, and error/jam history for recurring problems.
Inspect drum and roller counters, recommending replacement for parts over 100% usage.
Create copy/print samples from ADF and Copy Glass to assess quality before service.
Test paper feeding and copying functions from all cassettes.
Clean ADF dust, rollers (P/U, Sep), glass, and platen roller for optimal performance.
Clean rollers in cassettes, multi-purpose tray, and vertical paths to ensure smooth paper feed.
Clean the ITB area, registration patch sensor, fixing unit, and laser slit/dustproof glass.
Clean the drum area light guide and empty the waste toner bottle.
Conduct color adjustments and auto gradation, especially for heavy paper types.
Create copy/print samples from ADF and Copy Glass to verify post-service quality.
Verify paper feeding and copying functions from all cassettes after service.
Record all service actions, parts used, and generate P-Prints for the service log.
Re-run COM-TEST, address final customer concerns, and confirm satisfaction.
To Next Page