Canon imageRUNNER ADVANCE C5051i User Manual

xxiii
Periodic Inspection of the Breaker
This machine has a breaker that detects excess current or leakage current. Make sure to test the breaker once or twice a
month using the following procedure.
Make sure that the main power is turned OFF, before inspecting the breaker.
If a malfunction occurs after an inspection, contact your local authorized Canon dealer.
Checking the Breaker
1 Push the test button on the rear of the machine with the tip of a ball-point pen, or a similar
object.
Briefly push the test button.
The breaker is located on the rear of the machine.
For more information on the location of the breaker, see e-Manual > Before You Start Using This Machine.
2 Confirm that the breaker lever is switched to the OFF (" " side) position.
ON
( I side)
OFF
( side)
Do not use the test button to turn the power ON and OFF.
If the breaker lever does not switch to the OFF (" " side) position, repeat step 1.
If the breaker lever does not switch to the OFF (" " side) position, despite carrying out the above procedure two or three times,
contact your local authorized Canon dealer.
•
•
•
•
•
•
•

Canon imageRUNNER ADVANCE C5051i Specifications

General

Functions	Print, Copy, Scan, Fax
Print Speed (Color)	51 ppm
Print Speed (Black & White)	51 ppm
Print Resolution	1200 x 1200 dpi
Display	10.1-inch color touchscreen
Operating System Compatibility	Windows, macOS, Linux
Duplex Printing	Yes
Scanner Resolution	600 x 600 dpi
Standard Paper Capacity	1, 200 sheets
Connectivity	USB, Ethernet, Wi-Fi
Supported Paper Sizes	Letter, Legal