Need help?Do you have a question about the Canon Inner Finisher-H1 and is the answer not in the manual?
General| Type | Inner Finisher |
|---|---|
| Staple Capacity | 50 sheets (20 lb Bond) |
| Staple Positions | Corner, Double |
| Power Source | AC 100-240V, 50/60Hz |
| Function | Stapling |
| Paper Size | A4, A5, Letter, Legal |
| Paper Weight | 52 to 256 gsm |
| Output Capacity | 500 sheets |
Safety guidelines for using power sources and extension cords for the equipment.
Precautions to follow before performing maintenance or repairs on the equipment.
Instructions and warnings for safely assembling and disassembling the device.
Details technical specifications such as paper handling, dimensions, and operational modes.
Explains the function and operation of the unit responsible for feeding paper into the finisher.
Describes the unit that aligns, shifts, and staples paper before delivery.
Explains how paper is aligned and shifted in different operational modes.
Covers the process of stapling paper, including positions and capacity.
Details the operation of binding paper without using staples.
Details the operation and detection mechanisms of the stack tray.
Outlines various jam codes, types, sensors, and descriptions for troubleshooting.
Lists scheduled maintenance tasks, part replacements, and cleaning intervals.
Step-by-step guide for detaching the finisher from the host machine.
Procedure for detaching and removing the stapler unit from its mount.
Detailed steps for replacing the main control board of the finisher.
Procedures for backing up and restoring settings when replacing the finisher controller PCB.
Comprehensive guide for installing the finisher onto the host machine.
To Next Page
