EasyManua.ls Logo

Canon iR ADVANCE C5035i Series User Manual

Canon iR ADVANCE C5035i Series
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
How to replace an iR ADVANCE C5035i series toner cartridge
APPLICABLE DEVICES: All imageRUNNER ADVANCE C5*** series multifunctional devices
MST 01/2011
Press the replace toner button ( ) on the device
touch screen to display the instructions to replace
toner.
Open the cover where the toner cartridges are
located.
Press Remove Toner Cartridge on the device touch
screen.
1
2
3
When the message “Replace Toner” or the replace toner button ( ) appears on the device touch screen, either follow the instructions on the touch screen or the steps
highlighted below.
When this message appears select Yes.
The internal cover concealing the toner cartridge will
open automatically.
Carefully remove the toner cartridge.
4
5
6
Follow the remaining steps on the touch screen
to replace the toner cartridge and press Next after
completing each step.
Close the internal cover then close the outer toner
replacement cover.
7
8
Question and Answer IconNeed help?

Do you have a question about the Canon iR ADVANCE C5035i Series and is the answer not in the manual?

Canon iR ADVANCE C5035i Series Specifications

General IconGeneral
Print Resolution1200 x 1200 dpi
Print Speed35 ppm
Paper Capacity Standard550 sheets
Duplex PrintingYes
Network ConnectivityEthernet, USB, Wi-Fi
FunctionsPrint, Copy, Scan
Memory2 GB
InterfaceUSB 2.0
Power SourceAC 220-240V, 50/60Hz
TypeLaser
Fax Speed33.6 kbps
Operating System CompatibilityWindows
Supported Media SizesA4, A5, B5, Custom

Summary

How to Replace Toner Cartridge

Prepare Machine for Toner Replacement

Initiate replacement via touch screen, open covers, and confirm prompts.

Install New Toner Cartridge

Remove old cartridge and follow on-screen instructions to install the new one.

Complete Toner Replacement Process

Close internal and outer covers to finish the toner replacement.

How to Change Waste Toner Unit

Remove Waste Toner Container

Open front cover, lower lever, and pull out the waste toner container.

Install New Waste Toner Container

Insert the new waste toner container and return the locking lever.

Close Machine After Waste Toner Replacement

Close the front cover of the main unit to complete the task.

Related product manuals