Canon iR1018 Series User Manual

1
2
3
4
5
7
8
9
6
TOP
Back Previous Next
2-7
Table of Contents
Index
Advanced Send
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
System Manager
Settings
Reports and Lists
Troubleshooting
Appendix
5. Press [ ] or [ ] to select the size of the
document, then press [OK].
6. Press [ ] or [ ] to select the paper size,
then press [OK].
7. Use the numeric keys to enter the desired
copy quantity (1 to 99).
8. Press [Start].
To cancel all settings, press [Reset].
NOTE
– When you set the document on the platen glass, press [Start]
for each document. When scanning is complete, press [OK].
– A maximum of
1
/8" (2 to 3 mm) margin will be produced
between the two reduced documents in 2 on 1 combination
copying.
■ Frame Erase
You can erase shadows and lines that appear when copying
various types of documents.
Original Frame Erase Copying
Original (STMT)
Copy (LTR)
Original Frame
Erase Selected
Original Frame
Erase Not
Selected
Copy (LTR)

Canon iR1018 Series Specifications

General

Print Technology	Laser
Max Paper Size	A4
Duplex Printing	Manual
Connectivity	USB 2.0
Paper Output	100 sheets
Copy Resolution	600 x 600 dpi
Network Ready	No
Scanner	Yes
Copier	Yes
Printer	Yes
Fax	No
Print Speed	18 ppm
Print Resolution	600 x 600 dpi
Paper Input (Standard)	250 sheets
Paper Sizes	A4, A5, B5
Copy Speed	18 cpm
Multiple Copy	Up to 99 copies
Scan Resolution	600 x 600 dpi
Scan to	PC
First Copy Time	Less than 10 seconds