Canon IXUS 40 User Manual

117
Playback
Adjusting the Play Time and Repeat Settings
You can change the play time for all the images in a show and have the
show repeat continuously.
• The display interval may vary slightly from the set time for some
images when played.
• Slide shows are easy to arrange on a computer with the supplied
software (ZoomBrowser EX/ImageBrowser). See the
Canon Digital
Camera Software Starter Guide Disk
.
Play Time
Sets the duration that each image displays. Choose between 3-10
seconds, 15 seconds, 30 seconds and Manual.
Repeat
Sets whether the slide show stops when all the slides have been
displayed or continues until stopped.
1
Display the Slide Show menu.
See Starting a Slide Show (p. 114).
2
Use the or button to select
[Set up] and press the FUNC./SET
button.
3
Use the or button to select
[Play Time] or [Repeat] and the
or button to select an option.
4
Press the MENU button.
The set up menu will close. Pressing the MENU
button again returns to the Play menu. Press it
again to go back to the playback screen.

Canon IXUS 40 Specifications

General

Optical Zoom	3x
Digital Zoom	3.6x
LCD Screen Size	1.5 inches
Image Processor	DIGIC
Storage Media	SD card
Optical Sensor Size	1/2.5 inch
Image Sensor	CCD
Supported Flash Memory	SD Card
LCD Screen Resolution	118, 000 pixels
ISO Sensitivity	Auto, 50, 100, 200, 400
Shutter Speed	15 - 1/2000 sec
Sensor Resolution	4.0 Megapixels
Maximum Video Resolution	640 x 480
Type	Compact
Focal Length	5.8 - 17.4 mm
Weight	130 g
Battery Type	NB-4L rechargeable lithium-ion battery