● See When an Error Message Appears(P. 357) .
7
Select a wireless LAN router, and press .
● Select the router whose SSID matches the one that you have written down.
If your wireless router is not found
● Check whether the machine is properly installed and ready to connect to the network.
Installation/
Settings Problems(P. 369)
8
Enter the network key that you have written down.
● Enter the network key using the numeric keys, select <Apply>, and press .
Entering Text(P. 32)
WEP WPA-PSK or WPA2-PSK
9
Select <Yes>, and press .
If an error message is displayed during setup
● Press , check whether the network key is correct, and return to step 5.
10
Check that the Wi-Fi indicator is blinking on the operation panel.
● The Wi-Fi indicator blinks when a wireless router is detected.
● When the setup is completed, the screen below is displayed, and approximately 2 seconds later, the Wi-Fi
indicator lights up.
Network
144
To Next Page
Loading...
