Canon LBP251 - Page 266

◼ Register the digital certicate issued by the certication authority.
You cannot use the key pair generated by the Certicate Signing Request (CSR) until the certicate is registered. Once
the certication authority has issued the digital certicate, register it using the procedure below.
1
Start the Remote UI and log on in System Manager Mode. Starting Remote
UI(P. 270)
2
Click [Settings/Registration].
3
Click [Security Settings] [Key and Certicate Settings].
4
Click [Key Name] or [Certicate] for the certicate to be registered.
5
Click [Register Certicate].
6
Click [Browse], specify the le for the certicate signing request, and click [Register].
Security
260